The Mono Volume/EXP Pedal is designed for the ultimate transparency and tone, while maintaining 100% passive operation. This device is designed on the platform of a Boss FV-500 volume pedal, but completely removes all unnecessary components effecting the purity of the guitar signal, and then re-wires the unit to only its essential components. This results in a completely transformed pot taper, a more "open" and dynamic sweep, and superior interaction between the guitar(s), pedal(s), and amplifier(s).
The features include:
- Compatible with high impedance signals ONLY
- Ideal for non-buffered racks/pedalboards or as a gain control for the guitar
- 100% passive
- Expression compatible (with TRS cable)
- Refined aesthetic design
- Modified and handcrafted in the San Francisco Bay Area
Control: MINIMUM VOLUME knob
Connectors: INPUT jack, OUTPUT jack, EXP (Expression) jack, TUNER OUT jack
Size and Weight
Width: 110 mm; 4-3/8 inches
Depth: 289 mm; 11-7/16 inches
Height: 72 mm; 2-7/8 inches
Weight: 1.2 kg; 2 lbs. 11 oz.
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|