The Rocktron Reaction Chromatic Tuner is simple to use. We've made things easy with a large segment note display that provides easy viewing.
Flashing FLAT and SHARP LEDs also make it easy to see just where your tuning is at the moment and how close you are to getting into tune. A bright blue LED shows you precisely when you are, in fact, in tune.
When turned on, the Reaction Tuner output is muted, thus allowing for silent tuning. The Reaction Tuner offers a calibration button that allows you to adjust the tuner in order to tune to instruments that are "out of tune", such as an old piano.
Like all of Rocktron's Reaction Series pedals, the Reaction Tuner is built into a rugged metal slim form factor chassis, taking up as little space as possible on your pedalboard.
The footswitch on the Reaction Tuner controls on/off status as shown by the LED indicator. Reaction stomp boxes run on a 9V alkaline battery, or may also be powered by Rocktron's DC OnTap Universal Power Supply adaptor.
Maximum Input: +8dBu
Maximum Output: +6Bu
Input Impedance: 1MΩ
Output Impedance: 1kΩ
Current Consumption: 20mA
Power Requirements: 9V Alkaline Battery or Rocktron DC OnTap Universal Power Supply (sold separately). Negative Tip.
Dimensions: 125mm x 78mm 61mm, 5” x 3.25” x 2.5”
Weight: 0.7kg, 1.5lbs
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|