Just like our discontinued Honey Comb Single, the Honey Comb Deluxe gives you true vintage analog tone and ease of operation that will open up a new pallet of sounds reminiscent of early Fender blackface and vintage Vox tremolo circuits from years gone by. The only difference is that this one has those over the top options for the more demanding trem-o-haoulic.
We start by giving you an extra LED for the rate speed that stays on even when the pedal is in bypass. This allows a constant monitor on your speed. The next thing we do is add a second footswitch that allows you to alternate between two independently controlled speed knobs! This is like having two tremolos in one enclosure. The knobs are located over a third LED that is always on as well. When the LED is red it means you have the red speed knob activated and when it’s green… You guessed it; you have the green knob activated.
On V2's you will see a small red switch inside the pedal on the circuit board. Flip this switch down for slower speed ranges or keep it up for the stock speed range.
This pedal requires standard 9V DC Negative power and measures 2.2"x4.3"x1.5"
V1 = bee logo, slightly darker yellow powder coat.
V2 = current production model as seen, internal dip-switch for dual speed adjustment, some early V2's do not have dip switch
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|