Based on the DALLAS RANGEMASTER treble booster, as used by Clapton in the Bluesbreakers, Rory Gallagher, Brian May and Tony Iommi. This booster adds treble and gain, and Cesar added a HI/MID/LO switch to choose an EQ setting which the original pedal did not have.

Elliot Easton, Guitarist from The Cars wrote :

This is a sort of 3 position boost (Hi,Mid,Low) with a VERY interactive gain control.On the "HI" setting, I found that a Rickenbacker 12-string with lots of compression gets that perfect Vox treble boost sound that McGuinn employed on the Byrds stuff. The "Low" setting really adds girth to a Srat for a very big ,"Hendrixy" effect.Those looking for that type of flexibility in a pedal should just go buy it.Today.Everything seems to benefit from being run through it. A wonderful addition to your signal chain-whatever you play!

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download