GearTunes    > Treasure Chest    > West Coast Pedal Board    >

Teak Reclaimed 12"x24” Pedal Board — Street: $569.99

Reclaimed teak pedalboard and tweed case. The teak is surfaced to a light weight, high strength 3/4".  Half blind dove tailed joints and 3/8" radius border for a very smooth transition around the deck.  We have 3(three) 12X17" and 1(one) 12X24" each with unique characteristics.  These come in either gold or silver badging.  2 electro-socket 1/4" jacks with George L cable leads for easy guitar and amp hookups, 1 power input and recessed indicator badging that identify each input type.  2 Low profile rack pulls(handles) for easy maneuverability.  Finished off with teak oil, applied by hand that illuminates, protects and highlights the natural beauty. 

The lacquered tweed case is tinted with a bit of amber.  The interior is green velvet lined foam, a slick look complementing the boards natural beauty.  Lift off hinges to easily remove the top case.

- Reclaimed teak
- 12"X24"X4.5" Outer Dims | 10.5"X15.5" Deck Area
- Half blind dove tails
- 2(two)1/4" I/O's
- AC power in with internal cabling
- Super Loop - Tour Grade Pedal Board Deck Material
- Cable access slot
- Gold indicator badging
- Hand finished with teak oil
- tweed case with tour foam

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download