EASY-TO-USE PRACTICE AMP

For the beginning electric guitarist or anyone who wants a small, easy-to-use practice amp with quality tone and a great price, the Frontman 10G is at your service. Conveniently compact and built with classic Fender style, it delivers full sound from its 6” speaker, with a gain control and overdrive switch that rock guitar tones from tube-emulated overdrive to full-strength ultra-saturated distortion—perfect for blues, metal and famous Fender clean tone.

 

FEATURES

- 10 watts
- 6” Fender Special Design speaker
- Gain, volume, treble and bass controls
- Overdrive switch
- 1/8” auxiliary input and headphone output jacks
- Closed-back construction

 

HEADPHONE JACK

For convenient personal listening at any time that won’t bring the house down on anyone else within earshot, this amp features a headphone output jack.

 

OVERDRIVE SELECT SWITCH

For thick overdriven distortion at the push of a button, the Frontman 10G features a convenient front-panel clean/overdrive switch.

 

SILVER GRILLE CLOTH

The Frontman 10G features the classic Fender look of sparkling silver grille cloth.

ELECTRONICS

VOLTAGE: 120V
WATTAGE: 10 Watts
CONTROLS: Gain, Over-Drive Select Switch, Volume, Treble, Bass
CHANNELS: One
INPUTS: One - 1/4"

 

HARDWARE

CABINET MATERIAL: 7-Ply 3/4" Medium-Density Fibreboard
AMPLIFIER COVERING: Black Textured Vinyl
GRILLE CLOTH: Silver
AMPLIFIER JEWEL: Red LED
FRONT PANEL: Blackface™ Style
HANDLE: Molded Plastic Strap with Nickel-Plated Caps

 

SPEAKERS

SPEAKERS: One - 6" Fender® Special Design
TOTAL IMPEDANCE: 4 ohms

 

MEASUREMENTS

LENGTH (IN INCHES): 5.75
HEIGHT (IN INCHES): 11
WIDTH (IN INCHES): 10.25
WEIGHT (IN POUNDS): 8.5

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download