Select images for product info and authorized dealers for gear shown in this video.

  • Fender Champion 20
  • Fender Champion 40
  • Fender Champion 100

AN IDEAL PRACTICE AMP

Compact, easy to use and versatile enough for any style of guitar playing, the 20-watt Champion 20 is an ideal choice for your first practice amp. Straightforward controls, cool effects and versatile amp voicings make it easy to dial in just the right sounds for rock, blues, metal, country, jazz and more.

 

FEATURES

- 20 watts
- 8” Fender Special Design speaker
- Single channel and input
- Reverb, delay/echo, chorus, tremolo, Vibratone and other effects
- Different amp voicings and distortion types
- 1/8” auxiliary input and headphone output jacks

 

ONBOARD EFFECTS

In addition to their fantastic uncolored sound, many Fender amps come equipped with onboard effects that convey a versatile wealth of tonal coloring, atmospherics and textures. Includes reverb, delay, chorus, tremolo and much more.

 

AMP MODELING

This amplifier features digital amplifier modeling encompassing a variety of amp types old and new, U.S. and U.K., and more. From classic Fender amp sounds to modern designs voiced for specific styles (i.e., metal), it’s just like having several amps in one.

 

HEADPHONE JACK

For convenient personal listening at any time that won’t bring the house down on anyone else within earshot, this amp features a headphone output jack.

ELECTRONICS

VOLTAGE: 120V
WATTAGE: 20 Watts
CONTROLS: Channel 1: Volume, Channel 2: Gain, Volume, Voice. Master: Treble, Bass, FX Level, FX Select, TAP
CHANNELS: One - (with Selectable Amp Voice)
INPUTS: One - 1/4"
EFFECTS LOOP: Effects Loop (Preamp Out, Power Amp In) for Use with Outboard Effects

 

HARDWARE

AMPLIFIER COVERING: Black Textured Vinyl
GRILLE CLOTH: Silver
AMPLIFIER JEWEL: Red LED
FRONT PANEL: Black Angled
HANDLE: Molded Plastic Strap with Nickel-Plated Caps

 

SPEAKERS

SPEAKERS: One - 8" Fender® Special Design
TOTAL IMPEDANCE: 8 ohms

 

MEASUREMENTS

LENGTH (IN INCHES): 7.5
HEIGHT (IN INCHES): 12.75
WIDTH (IN INCHES): 13.75
WEIGHT (IN POUNDS): 12

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download