GearTunes    > Solid Body    > Gibson    >

Les Paul Custom (Heritage Cherry Sunburst) — Market Price (discontinued)

Signal Chain

  • Gibson Les Paul Custom (Heritage Cherry Sunburst)
  • Dunlop Manufacturing Tortex 1mm Blue
  • Bogner 20th Anniversary Ecstasy
  • Bogner 412ST 4x12 Cabinet
  • Royer Labs R-121
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

The epitome of stylish sophistication.Gibson’s Custom Shop Les Paul Custom guitar is crafted in America with a one-piece mahogany set neck, carved maple top and mahogany body for incredible warmth and sustain. An ebony fingerboard provides a crisp, bright attack. 490R and 498T Gibson humbucking pickups deliver creamy rhythm and hot, molten lead sounds. Also features a Nashville Tune-O-Matic bridge, stopbar tailpiece, and bound body, neck, and headstock, nicely accentuated with gold hardware. Use the drop-down menu above to choose colors and other options.

One-piece mahogany neck
Carved maple top
Warm-toned mahogany body
24-3/4" scale
Richlite fingerboard
22 frets
Figured acrylic block inlays
Gold hardware
490R neck humbucker with Alnico II magnets
498T bridge humbucker with Alnico V magnets
Nashville Tune-O-Matic bridge with stopbar tailpiece
Tulip tuners
Body, neck, and headstock binding
1-11/16" nut width

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download