T-Rex Engineering is proud to announce ToneBug Reverb, a stunning new reverb pedal built with one goal in mind: to bring dry, flat-sounding, bedroom-bound guitar playing to life. ToneBug Reverb simulates real-life performance environments – from huge echoey concert halls and modern-sounding live stages, to raunchy clubs and basement dives. But no matter what setting you choose, loads of incredible T-Rex tone will keep you sounding like the best of them.
Modern or spring
What makes ToneBug Reverb so versatile is its ingenious dual mode feature. The mode switch lets you go from Modern, for more contemporary reverb sounds, to Spring – for a world of vintage reverb that sounds almost too authentic to be true. It’s really like having two separate pedals in one. Try ToneBug Reverb today, and discover why it’s the one pedal you’ll never want to live without.
REVERB |´re,vә rb; ri´vә rb|
an effect whereby the sound produced by an amplifier or an amplified musical instrument is made to
– New Oxford American Dictionary
T-REX REVERB |tē reks´rē, vә rb; ri´vә rb|
a huge, vibrant, gorgeous-sounding effect that brings your sound to life by putting you right on
stage in a everything from a dark, sweaty blues club to a monster stadium.
– Guitarists around the world
Input impedance @ 1KHz Higher than 1M Ohm
Output impedance@1KHz Lower than 1K Ohm
Power supply 9V DC (T- Rex FuelTank)
Minimum power supply voltage 8V DC
Maximum power supply voltage 12,5V DC
Current Draw @ 9V DC 75 mA
Maximum input signal Vp/p 2,5Vp/p
Battery type 9V battery 6F22
Battery life 0,5 to 1 hour
External connectors Input Jack, Output Jack,
9V DC Jack (center pin negative)
Controls On/Off, Decay, Modern/Spring, Depth
Pedal size incl. knobs (W x H x D) 78 x 60 x 120 mm 3,1 x 2,4 x 4,7 inch
Weight excl. battery and packaging 0,370 kg / 13,05 oz
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|