GearTunes    > Reverb    > Blackstar    >

HT-Reverb — List: $375.99 Street: $299.99

Signal Chain

  • Ibanez S470
  • Dunlop Manufacturing Tortex 1mm Blue
  • GHS Progressives, 9-42
  • Blackstar HT-Reverb
  • Radial SGI
  • Roland JC-120
  • Shure SM57
  • AEA TRP
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

Signal Chain

  • Fender Standard Stratocaster
  • GHS Progressives, 9-42
  • Dunlop Manufacturing Tortex 1mm Blue
  • Blackstar HT-Reverb
  • Roland JC-120
  • Shure SM57
  • AEA TRP
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

The HT-REVERB can take you from your room to an arena via hall, plate, spring, gate and reverse reverb effects. Valve compression and harmonics are added using the Dwell control, and you can switch the reverb time from short to long while you are playing.

HT-REVERB Pedal Overview
8 reverb effects
Genuine valve design
Operates at 300V HT
Unique dwell control
Manual and Short/Long modes
Stereo
Unique switching operation
Silent switching
Power supply included
High integrity buffered bypass
 

HT-REVERB Features Overview

Operates at 300V HT
All the Blackstar pedals operate on 300VDC anode supply voltage (H.T. voltage). 

8 Reverb Effects
The HT-REVERB can take you from your room to an arena via hall, plate, spring, gate and reverse reverb effects.

Unique Dwell Control
The HT-REVERB's dwell control affects the amount of valve compression and harmonics present in the effect.

Manual and Short/Long modes
The HT-REVERB features manual and short/long modes for maximum playing flexibility.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download