PURE ’60S FENDER SURF SOUND
For guitarists who absolutely must have the real-deal sound and style of Fender’s original early-’60s reverb unit, this is it. The famous all-tube Fender Reverb unit has been a staple of virtually every surf recording and performance since the early ’60s, and blues and experimental players love it too. The reissue ’63 Fender Tube Reverb returns you to the sound’s wave-cresting early-’60s origins, with authentic vintage styling and unmistakable surf-drenched sound that can be used with any amp.
- On-off footswitch
- Dwell, mix and tone controls
- Authentic vintage styling
Simply put, there’s really nothing quite like the pure, powerful sound of a Fender tube amplifier. For decades, the tonal richness and touch-sensitive dynamics of real tubes have given Fender amps a defining and unmistakable voice, as heard on most professional recordings and performances of the past 60 years—the music you’ve known your whole life.
Among their many fine sonic attributes, Fender guitar amps like this one are prized in particular for their luscious spring reverb. For that wet, shimmering ambient sound ranging from subtle to cavernous, Fender lets you dial it in exactly to taste.
ASSEMBLED IN THE U.S.A.
Just like the great Fender guitar amps of the 1950s and ’60s that founded our amp legacy and defined the essence of pure tone and power, this amplifier is assembled in the United States.
CONTROLS: Dwell, Mix, Tone
INPUTS: One - 1/4"
SPEAKER JACK: Two 1/4" Parallel
CABINET MATERIAL: 7-Ply 5/8" Birch Plywood
AMPLIFIER COVERING: Lacquered Tweed
GRILLE CLOTH: Vintage-Style Brown and Gold
AMPLIFIER JEWEL: Red Jewel
HANDLE: Vintage-Style Leather with Nickel Mounting Hardware
PREAMP TUBES: 1 x 12AX7, 1 x 12AT7
POWER TUBES: 1 x 6V6
RECTIFIER: Solid State
LENGTH (IN INCHES): 7.5
HEIGHT (IN INCHES): 10.5
WIDTH (IN INCHES): 18.875
WEIGHT (IN POUNDS): 13
FOOTSWITCH: 1-Button Footswitch Included
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|