Metal Amps EZmix Pack
Metal Amps EZmix Pack comes with a collection of 50 guitar and bass tones based on IRs and modeling of some of the most well known high gain amps and speaker cabinets of the past decades. All presets were custom-made by renowned engineer Jocke Skog and designed to cater to a broad use spanning all the fragmented genres in classic and modern metal.
"After having spent 20 years looking for the perfect guitar tone and recorded IRs for as long as I can remember, I have a pretty good idea where to start, what to avoid and what to look for. I am confident that anyone into thrash, death, black, djent or any type of metal in between will find several tones that sound absolutely right."
The pack focuses primarily on rhythm guitar and bass tones. Each setting comes with a set of user-adjustable parameters, allowing you add more or less of its unique characteristics to tweak and customize the preset into your own custom sound.
From the several hundred IRs that were recorded for this session, Jocke boiled it down to the 50 absolutely stand-out ones and delivered a collection of guitar and bass tones that will cover your fundamental needs in anythin
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|