GearTunes    > Picks    > Dunlop Manufacturing    >

Tortex 1mm Blue — List: $5.82 (12-pack)

Signal Chain

  • Nashguitars T-63
  • Wampler Pedals Ecstasy
  • Wampler Pedals Faux Tape Echo
  • Fender Twin Reverb II
  • Aracom PRX150-Pro2
  • Orange PPC212OB
  • Celestion Vintage 30, 16 ohm
  • Royer Labs R-121
  • Avalon M5
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

Signal Chain

  • Ibanez S470
  • Dunlop Manufacturing Tortex 1mm Blue
  • GHS Progressives, 9-42
  • Millennia Music & Media Systems HV-37
  • Radial JCR Reamp
  • Boss GT-100
  • Tech 21 Power Engine 60
  • Shure SM57
  • Avid Digi 003
  • Universal Audio UAD-2 Satellite Quad Core

    - Gauges (MM): .50, .60, .73, .88, 1.0, 1.14MM.

    - Maximum memory.

    - Minimum wear.

    - Made of the ever-popular Tortex® material for a long life and bright tone.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download