Never losse another pick - Seriously!

PicStix® is an adhesive gel strip designed exclusively to hold guitar picks in place anywhere on your guitar, amplifier, or other flat surfaces. Unveiled at the Summer NAMM Show and winning “Best in Show” by Music Inc. magazine, PicStix® is available now directly online and is currently looking to establish retailers and distributors worldwide.

One of the most challenging things, while playing guitar, is finding your pick. For years, guitar players have tried many techniques; including duct tape, clear tape, glue and double-sided tape. All creating problems in destroying the guitar finish, destroying the pick, leaving behind sticky residue, and collecting dirt. PicStix® is just the opposite, it is removable, reusable and leaves no residue.

Each package contains two PicStix.  Each one is a double sided, 3 inches long, adhesive gel strip.  Players can place it anywhere they want their picks to be.  The gel strip is removable, reusable and leaves no residue.  If it should get dirty; the player can rinse with water, gently rub, dry and reuse.  Applying PicStix is easy.  Remove one of the blue liners and apply the strip to any clean surface.  Once applied, remove the second blue liner and press the guitar pick tip onto the gel strip.  PicStix holds all shapes, material, and sizes.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download