Gear Featured in This Video - Select Images for Product Pages

  • Lehle D.Loop
  • Rocktron Tru-Loop
  • TheGigRig MIDI-8
  • Voodoo Lab Pedal Switcher
  • Voodoo Lab Commander

Get the effects you want without trashing your tone!

On a traditional pedalboard, even when the effects are off, your signal still goes through numerous tone-trashing buffers, solid-state switches and patch cables. Pedal Switcher™ uses 4 true bypass loops to send your signal only to the pedals you’re using. Built with the finest gold relays sealed in nitrogen, your tone will stay pure and dynamic no matter what kind or how many pedals you use.

With Pedal Switcher™, you can use all those great classic and modern stompboxes without destroying that pure “straight to amp” sound. Now you have the freedom to use any pedals you want, and never have to worry that the buffer in your overdrive is killing your vintage fuzz!

Pedal Switcher™ features 4 instant access switches, buffered and non-buffered inputs, and a TRS insert for putting devices like a volume pedal between effects. Loops can also be used as a mute for silent tuning onstage, and A/B amp switching. Add a Commander and you can control an unlimited number of Pedal Switcher units allowing you to store combinations of pedals. Check out Commander here.

Features:

 4 True Bypass audio loops
 4 Instant access on/off switches
 A/B Amp selector (loop 4)
 Loops can be used for signal mute and silent tuning
 TRS Insert (between loops 3&4)
 Programmable presets via Commander 
 Fully compatible with Ground Control Pro and GCX Audio Switcher
 MIDI In/out

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download