Gear Featured in This Video - Select Images for Product Pages

  • Lehle D.Loop
  • Rocktron Tru-Loop
  • TheGigRig MIDI-8
  • Voodoo Lab Pedal Switcher
  • Voodoo Lab Commander

Stomp less, play more!

Commander™ you can store presets for an unlimited number of Pedal Switcher™ units allowing you to concentrate on playing instead of tap dancing. With one stomp, you can instantly go from screaming vintage fuzz with flange and echo, to clean straight-to-amp tone without ever missing a note.

Commander™ features 10 user customizable presets and is phantom powered by the Pedal Switcher™. With Pedal Switcher™ and Commander™, you can build your ultimate pedalboard and sound better, stomp less, and play more!

[Voodoo Lab Commander]

 

Features:
 10 user customizable presets
 5 preset access switches (plus bank up/down)
 Phantom powered by Pedal Switcher
 Controls an unlimited number of Pedal Switcher units
 Multiple Commanders can be used for changing presets from an alternate stage position 
 MIDI In/out

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download