This is our "Everything Medium to High Gain 2 in 1" and it covers all the bases from clean boost, light breakup, blues, rock, heavy grind and more.
The right side is our JHS-808 circuit. It has a smoother, more usable tone control and all the character you would expect from this classic legendary design. High quality components yield excellent bass response and lower noise than any unit on the market. The V2 now has a 3 way gain switch for 3 different varieties of drive saturation and flavor. Even the current reissues can’t hang with this one!
On the left side is our very own “Angry Charlie”. High gain JCM 800 type “Brown” sound tone that we believe is the most accurate Marshall tone ever put in a stomp box! It has volume, drive, tone and presence controls. The presence control allows this monster to bring any amp into submission and make tone that will have ears wanting more.
The V2 now has our famous order toggle so you can choose what circuit comes first in the chain. This is great for stacking in different ways and for getting a wide range of tones.
With these tones combined or used separately, the Sweet Tea is more tone than you can shake a stick at!
This pedal requires standard 9V DC Negative power and measures 4.7"x3.7"x1.2"
V1 = slightly different icon, no toggles.
V2 = current production model, order toggle and gain toggle added.
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|