The Angry Charlie "Channel Drive." In the footsteps of the classic Marshall Gov’ner this monster was born. Just like its big brother the Charlie Brown, the Angry Charlie is versatile, well rounded and full of tone, but one thing sets them apart. This one's a little more Angry… If you want high gain Marshall tones reminiscent of a JCM-800, then this is the pedal for you.
The gain knob has an unbelievable range of overdrive to head-on heavy grind, and the tone knob actually has a solid range unlike many distortions on the market. The additional presence knob adds a versatility and tweaking ability that transforms any amp into a fire breathing monster! Big classic distortion tones are what this box is all about. If you need a high gain but "realistic" sounding pedal then look no further!
This pedal requires standard 9V DC Negative power and measures 2.2"x4.3"x1.5"
V1 = larger enclosure and 3 controls, no presence control, no logo
V2 = changed to current production size enclosure and look. presence control added. Some early V2's have no icon as well.
***This pedal CAN be run at 18v for more headroom and greater dynamics
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|