GearTunes    >     > Audio-Technica    >

System 10 Stompbox Digital Wireless System — List: $614.95 Street: $349.95

select images for product info and authorized dealers for gear shown in this video.

  • Ibanez JEM7VWH
  • Audio-Technica System 10 Stompbox Digital Wireless System
  • Planet Waves Cable Station Pedal Board Cable Kit
  • Digital Audio Labs Stompblox Modular Pedalboards
  • Voodoo Lab ISO-5
  • Ebtech Hum X
  • Boss FDR-1 Fender ‘65 Deluxe Reverb Amp
  • Shure SM57
  • Triad-Orbit TRIAD-ORBIT System - T3/O2/M1
  • Universal Audio Apollo Twin
  • Universal Audio UAD-2 Satellite Quad Core

Audio-Technica’s System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next. 

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity. 

Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.

Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance

2.4 GHz range – completely free from TV interference
Three levels of diversity assurance: frequency, time, & space
Two switched TRS balanced 1/4" output jacks
Output mode selector and foot switch to toggle between outputs or mute/unmute Output A without muting Output B (e.g., for use with tuner)
Multi-pairing function to link a single receiver with up to eight body-pack transmitters
Transmitter battery level display on receiver
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and setup
State-of-the-art digital receiver housed in a strong, metal, stompbox-style body for reliable performance and pedal board mounting
Included hook & loop strips for adding receiver to effects pedal board
Universal (center + or -) 9v–12v DC input

OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies 2.4 GHz ISM band
Dynamic Range >109 dB (A-weighted), typical
Total Harmonic Distortion <0.05% typical
Operating Range 18.3 m (60') radius, 36.6 m (120') diameter typical
Open range environment with no interfering signals
Operating Temperature Range 0° C to +40° C (32° F to 104° F) 
Battery performance may be reduced at very low temperatures
Frequency Response 20 Hz to 20 kHz 
Depending on microphone type

RECEIVER SPECIFICATIONS
Receiving System Diversity (frequency/time/space)
Maximum Output Level 1/4" (6.3 mm), TRS balanced: +12 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Dimensions 101 mm (3.98") W x 44 mm (1.73") H x 130 mm (5.12") D
Net Weight 565 grams (19.9 oz)
Accessories Included Power supply, hook & loop fastener x2

BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Input Connections Four-pin Locking Connector 
Pin 1: GND 
Pin 2: INST INPUT 
Pin 3: MIC INPUT 
Pin 4: DC BIAS +9V
Batteries Two 1.5V AA 
not included
Battery Life >7 hours (alkaline) 
Depending on battery type and use pattern
Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight 100 grams (3.5 oz) 
without batteries
Accessory Included AT-GcW Guitar Input Cable

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download