We've taken all that you know and love about our TC Electronic delay sounds and poured it into a footprint too good to be true. There's more magic per square inch In Flashback Mini Delay than you'd find in a Smurf. The industry standard, most revered TC Electronic delay tones, plus TonePrint - the greatest innovation to guitar since guitar strings!
Just look at it. Who'd have thought such a tiny pedal houses such classic and classy delay sounds? Well, we've made it happen, and your ears and pedal board will be grateful.
TonePrint – Signature Effects
Flashback Mini Delay is TonePrint enabled. This means you get the revered TC sound multiplied to infinity with rockstar customized versions of the best delays TC has to offer - free of charge!
Room For Choice
An added benefit of TonePrint is that we can cram as many delay types into this little miracle as your heart desires. From tape, analog, the classic 2290 sound and dynamic delay, it's all here in spades!
True to Tone
You love tone, so do we, and our design philosophy testifies to that. So whatever route you wanna go, we got your back. With optimized headroom, True Bypass and even Kill-Dry on/off via our TonePrint Editor, this pedal guarantees optimal tonal integrity and zero loss of tone. And, no matter if the pedal is on or off your precious dry sound is always passed through the pedal unharmed in all it's pure analog glory due to an Analog-Dry-Through design.
Backstage Pass - All Access
A world of renowned TC delays at your feet, with room to spare! This tiny giant takes up zero space on your board, but can take whatever twisted delay creation you throw at it!
Flashback Mini Delay has an ultra-small footprint – it will fit on any pedal board, even yours!
Set the number of repetitions and how much effect is fed back to the input - short and snappy or infinite soundscapes ... you decide!
Keeps your tone YOURS. We never convert the dry signal, so you’ll always shine through with zero latency and total tonal transparency.
All Signals Go
Works equally awesome with guitar and line level/FX Loop signals.
Controls delay time. You’ve got all of 7 seconds, so you’ll run outta ideas before you run out of delay.
Free TonePrint Editor
Create your own custom delay pedal with the free TonePrint Editor!
From subtle ambience to total time warp, this is the knob that controls it all.
Load Flashback Mini Delay with your favorite artist’s delay tones
True Bypass for zero tone coloration.
Hold down the footswitch and set delay time by simply strumming your guitar!
Flashback Mini Delay Resume
TonePrint-enabled - load Flashback Mini Delay with your favorite artist's delay tones
Free TonePrint Editor - create your own custom delay pedal
Beam enabled - send TonePrints to Flashback Mini Delay through our free TonePrint app for iPhone and Android
Room for choice - select between renowned delays including tape, analog, 2290 and dynamic delay
Ultra-small footprint - so wear tiny shoes!
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|