The new Magnus effect board from T-Rex takes its name from King Magnus I, who ruled Denmark nearly a thousand years ago. The name means “great”—and when you plug your guitar into this board, you’ll hear its greatness from the first note you play.
A ROYAL FAMILY OF 5
Think of Magnus as a royal family of 5 classic T-Rex pedals—each with its own noble lineage. The Overdrive, Distortion, Delay, Reverb and Boost effects are all based on T-Rex classics used by the world’s best-known guitarists. And they all deliver the legendary vintage tone and uncomplicated operation T-Rex pedals are famous for.
LIVE ACTION OR PRESET PERFECTION
When you’re onstage or in the studio, you can use your Magnus in “Live” mode, switching individual effects on and off and adjusting them while you play. But you can also switch to “Preset” mode, which lets you program up to 10 preset combinations of your different Magnus effects. That way, you can quickly call up whole sonic realms on the fly, without having to deal with individual pedals.
TUNE IN TO GREATNESS
Let’s be honest: Not even a T-Rex effect is going to sound great if your guitar’s out of tune. That’s why Magnus comes with a built-in tuner that lets you silently tune before you start playing and keep you guitar in tune throughout the gig, without having to fiddle with external tuning devices.
The built in tuner is one more reason why we believe the T-Rex Magnus will quickly be crowned king of multi-effect boards—and the one indispensible tool for your guitar setup.
Try one today, and experience a great board with noble heritage that will instantly enrich your sound.
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|