GearTunes    > Multi-effects    > Line 6    >

M13 — List/Market Price: $699.99 / $499.99

Signal Chain

  • PRS NF3
  • Line 6 M13

Signal Chain

  • Nashguitars T-63
  • Line 6 M13
  • Roland JC-120
  • Shure SM57
  • Avid Digi 002

Signal Chain

Signal Chain

Signal Chain

Signal Chain

M13 Stompbox Modeler is the essential all-in-one pedal board experience. It features a comprehensive collection of stompbox effects, a full-featured looper and inspiring flexibility. Free of complicated menus or setup, M13 Stompbox Modeler channels the soul and ease of a classic stompbox.

Boasting over 100 distinctive distortions, velvety reverbs, juicy delays and more, M13 Stompbox Modeler gives you total tone control. Use up to four different effects - or four of the same - simultaneously. Stompbox-style knobs deliver on-the-fly tweaking.

Order the effects any way you want. Create different pedal board effect arrangements, or "scenes," to instantly recall an entire song's stompboxes. Save a scene for your metal band, one for your Top 40 gig…you get the picture. No more tearing up Velcro® just to change one or two pedals! Save up to 48 scenes and back them up to your computer using the MIDI in/out.

The 28-second looper is always at the ready with dedicated footswitches for Play/Stop, Half Speed, Reverse, Undo/Redo and more. Each metal footswitch can withstand constant stomping and rock and roll-style abuse.

Easy to use, built like a tank and sporting an on-board chromatic tuner, M13 Stompbox Modeler can maximize your pedal board (or even replace it) like no other pedal can.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download