The direct digital connection you need.
GuitarConnect Pro adds a guitar input to your Mac, iPad, iPhone or iPod touch. At one end, a 1/4" mono instrument jack fits your instrument cable, and at the other, 3 detachable cables for use with both iOS devices with Lightning connectors and 30-pin dock connectors, as well as Mac computers with USB ports.
Plug in a guitar, bass, keyboard... anything that takes a 1/4" mono plug. GuitarConnect Pro gives you the best connection from your instrument straight into GarageBand and your other audio apps. And it gives you a Gain Control wheel so you can balance the strength of your input signal.
GuitarConnect Pro opens up a world of digital audio possibilities for your playing. Use your Multi-Touch screen to tune, record, edit, add effects, and overdub while you play. The compact combo of GuitarConnect Pro plus your iOS device lets you take your editing setup with you in your instrument case.
- Turn your Mac, iPad, iPhone, or iPod touch into a compact performance, practice, or recording rig
- Noise-free, all-digital interface from your instrument to GarageBand and your other audio apps
- Add effects, looping, and overdubbing to your playing
- Dedicated gain control to fine-tune instrument input
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|