Premium Fret Edge Treatment
The premium fret edges are processed to be specially rounded for smooth play and comfortable neck grip.
Ovankol top lamination gives the bass a premium feel along with a strong presence.
Nordstrand™ "Big Single" crams as meaty a single coil as can fit in a soapbar style pickup, producing a full-bodied, powerful, aggressive tonal texture, while still retaining the clarity that's characteristic of single coil pickups.
The EQBIIISC is a customized 3-band EQ and a dedicated preamp for Nordstrand™ pickups for further pure and wider frequency response. This preamp system is equipped with an EQ bypass switch and a mid-frequency select switch(250Hz or
Neck type Atlas-5 5pc Wenge/Bubinga neck w/KTS™ TITANIUM rods
Body Ovankol top/Mahogany body
Fretboard Rosewood fretboard w/Abalone oval inlay
Fret Medium frets w/Premium fret edge treatment
Number of frets 24
Bridge Mono-rail IV bridge
Neck pu Nordstrand™ "Big Single" 5 neck pu
Bridge pu Nordstrand™ "Big Single" 5 bridge pu
Equaliser EQB-IIISC 3-band eq w/Eq bypass switch & Mid frequency switch
Nut saddles BLACK TUSQ XL® nut
Hardware color Gold
Case/bag Gig bag included
a : Width at Nut 45mm
b : Width at Last Fret 68mm
c: Thickness at 1st 19.5mm
d : Thickness at 12th 21.5mm
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|