Reverend has teamed up with country/roots-rock guitar legend and Grammy winning artist/producer Pete Anderson to deliver this modern day classic. They took the vintage T platform that Pete has long been associated with, and customized it for you with player approved mods: chambered body, stainless steel saddles, compound radius fretboard (10″ to 14″), push-pull phase switch (in the tone control), and “R” embossed knobs. This plank may look standard at first glance, but it’s factory hot-rodded and stage ready right out of the box!
Reverend designs their own proprietary custom pickups to achieve the best tonal match with their instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching.
A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes. Also, the posts are custom height, eliminating the need for a second string tree.
Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing their lively, responsive instruments that are rich in harmonics.
DUAL-ACTION TRUSS ROD
The dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.
The passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!
Reverend uses a graphite impregnated nut on all their instruments. Graphite reduces friction, allowing the strings to easily slide through the nut slots, improving tuning stability.
BODY: chambered korina.
NECK: maple, satin amber finish.
NUT: 1-21/32" (42 mm) width, graphite.
PICKUPS: Talnico bridge, Talnico neck.
FINGERBOARD: rosewood or maple, 12" radius.
CONTROLS: volume, tone, (pull phase), 3-way.
BRIDGE: tuneomatic with stop tail.
FRETS: 22 medium jumbo.
NECK PROFILE: medium oval.
TRUSS ROD: dual action, headstock access.
CASE: S-Case (available separately).
TUNERS: Reverend pin-lock.
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|