GearTunes    > Flanger    > Pigtronix    >

Quantum Time Modulator — List: $249.00 Street: $199.00

Pigtronix Quantum Time Modulator produces a parallel universe of analog time stretching effects with only three knobs and a single switch. Reflecting the fundamental principals of modern atomic physics in pedal form, the Pigtronix Quantum can be in any number of places at once and will change in response to both input and observation.

Pigtronix Quantum utilizes multiple bucket brigade delay lines with independent clocks modulated by a continuous blend of envelope and LFO sources. The corresponding sensitivity, speed and source controls are augmented by a Chorus / Vibe switch which allows the user to choose between pure effect or a mix of clean signal and modulated audio. This eminently flexible, yet easy to use configuration, combined with a TRS stereo output provides numerous sound field configurations for mono, true stereo, wet / dry and wet / dry / wet rigs.

Going well beyond the event horizon of existing modulation pedals, the Pigtronix Quantum slams the classic tones of complex rack units such as the Zappa’s MicMix DynaFlanger, Lifeson’s TC 1210 Spatial Expander & the venerable Roland Dimension D into a tiny and affordable analog stompbox while also blazing new territory that provides a musical analogy to the essential nature of reality itself.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download