GearTunes    > Artist Signature    > Fender    >

Stevie Ray Vaughan Stratocaster — List: $2,399.99 Street: $1,699.99

Stevie Ray Vaughan collaborated with Fender to produce a signature Stratocaster® guitar shortly before his untimely passing in 1990. It features an alder body and an early '60s oval neck profile, pau ferro fingerboard with jumbo frets, three Fender Texas Special™ single-coil pickups, gold-plated hardware and a reversed left-hand vintage tremolo unit.

General

Model Name: Stevie Ray Vaughan Stratocaster®, Pau Ferro Fingerboard, 3-Color Sunburst
Model Number: 0109200800
Series: Artist
Advertised Price: $1699.99
Color: 3-Color Sunburst

 

Body

Body Material: Alder
Body Finish: Urethane
Body Shape: Stratocaster®

 

Neck

Neck Material: Maple
Neck Finish: Gloss Urethane
Neck Shape: Thick "Oval"
Scale Length: 25.5" (648 mm)
Fingerboard: Pau Ferro
Fingerboard Radius: 12" (305 mm)
Number of Frets: 21
Fret Size: Vintage-Style
String Nut: Synthetic Bone
Nut Width: 1.650" (42 mm)
Position Inlays: Pearl Dot
Truss Rod Nut: Vintage-Style Slotted
Headstock: Artist Signature on Headstock
Neck Plate: 4-Bolt Custom

 

Electronics

Bridge Pickup: Texas Special™ Single-Coil Strat
Middle Pickup: Texas Special™ Single-Coil Strat
Neck Pickup: Texas Special™ Single-Coil Strat
Controls: Master Volume, Tone 1. (Neck Pickup), Tone 2. (Middle Pickup)
Pickup Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Pickup Configuration: SSS

 

Hardware

Bridge: 6-Saddle American Vintage Synchronized Tremolo
Hardware Finish: Gold-Plated
Tremolo Arm Handle: American Vintage
Tuning Machines: 6-in-Line American Vintage
Pickguard: 3-Ply Black with Engraved SRV
Control Knobs: White Plastic
Switch Tips: White

 

Miscellaneous

Strings: Fender® USA 250R, NPS, (.010-.046 Gauges)
Unique Features: Deep, Thick Oval Shape Neck, Gold Plated Vintage Hardware, Engraved SRV Pickguard, Left Handed American Vintage Tremolo
Included Accessories: Vintage Tweed Hardshell Case, Strap, Cable

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download