GearTunes    > Artist Signature    > Jackson    >

PC1 Phil Collen — List: $4,166.65 Street: $2,999.99

Mahogany body with quilt maple top, bolt-on quartersawn eastern hard rock maple neck, compound-radius flame maple fingerboard, licensed Fender® Strat® headstock, DiMarzio® pickups with Jackson® Sustainer/Driver in H/S/S configuration, Floyd Rose® Original tremolo, gold hardware.

General

Model Name: USA PC1™ Phil Collen Signature, Flame Maple Fretboard, Chameleon
Model Number: 2803050855
Series: Artist Signature
MSRP: $4166.65
Color: Chameleon

 

Body

Body Shape: Dinky™

 

Neck

Neck Material: 1-Piece Bolt-On Quartersawn Maple with Graphite Reinforcement and Scarf Joint
Scale Length: 25.5" (648 mm)
Fingerboard Radius: 12" to 16" Compound Radius (304.8 mm to 406.4 mm)
Number of Frets: 24
Fret Size: Jumbo
String Nut: Floyd Rose® Original Locking
Nut Width: 1.6875" (42.8 mm)
Position Inlays: Side Dot
Headstock: Artist Signature on Headstock
Neck Plate: 4-Bolt Standard

 

Electronics

Bridge Pickup: DiMarzio® Super 3™ Humbucking
Middle Pickup: DiMarzio® HS2 Stacked Humbucking
Neck Pickup: Jackson® Sustainer/Driver
Controls: Master Volume, Master Tone, Intensity Control
Pickup Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Pickup Configuration: HSS
Special Electronics: 18-Volt Jackson® Sustainer System

 

Hardware

Bridge: Floyd Rose® Original Double Locking 2-Point Tremolo
Hardware Finish: Gold-Plated
Tremolo Arm Handle: Floyd Rose® Original Tremolo Arm
Tuning Machines: Die-Cast
Control Knobs: Knurled Dome
Switch Tips: Black
Auxiliary Switching: 2-Mini Toggle Switches- Sustainer/Driver On/Off Switch, Fundamental/Harmonic/Blend Switch

 

Miscellaneous

Strings: NPS, .010-.052 Gauges
Included Accessories: Deluxe Jackson® Molded Case

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download