GearTunes    > Artist Signature    > Fender    >

Jeff Beck Stratocaster — List/Market Price: $2,199.99 / $1,599.99

Signal Chain

  • Fender Jeff Beck Stratocaster
  • Dunlop Manufacturing Nylon Standard, .88mm
  • Neunaber Technology WET Reverb
  • Welagen Overdrive Special
  • Dragoon 225C8M
  • Royer Labs R-121
  • Chandler Limited TG-2 Special Edition
  • Avid Digi 002

Signal Chain

  • Fender Jeff Beck Stratocaster
  • Dunlop Manufacturing Nylon Standard, .88mm
  • Welagen Overdrive Special
  • Avatar G112W Open Back 1x12 Cabinet
  • Scumback M75, 16 ohm
  • Royer Labs R-121
  • Avid Digi 002

Signal Chain

  • Fender Jeff Beck Stratocaster
  • Dunlop Manufacturing Nylon Standard, .88mm
  • Welagen Overdrive Special
  • Avatar G112W Open Back 1x12 Cabinet
  • Scumback M75, 16 ohm
  • Royer Labs R-121
  • Avid Digi 002

Select images for product info and authorized dealers for gear shown in this video.

  • Fender Jeff Beck Stratocaster

From his blistering British Invasion beginnings through his amazingly varied solo career and right up to today, Jeff Beck has made the Stratocaster® guitar an integral part of his signature sound. Fender's Jeff Beck Stratocaster features an alder body, soft C-shaped maple neck with contoured heel for easier access to high registers, and Fender Special Design dual-coil ceramic Noiseless™ pickups with five-way switching.

General

Model Name: Jeff Beck Stratocaster®, Rosewood Fingerboard, Olympic White
Model Number: 0119600805
Series: Artist
Advertised Price: $1599.99
Color: Olympic White

 

Body

Body Material: Alder
Body Finish: Urethane
Body Shape: Stratocaster®

 

Neck

Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: "C" Shape
Scale Length: 25.5" (648 mm)
Fingerboard: Rosewood
Fingerboard Radius: 9.5" (241 mm)
Number of Frets: 22
Fret Size: Medium Jumbo
String Nut: LSR Roller
Nut Width: 1.6875" (42.8 mm)
Position Inlays: Pearloid Dot
Truss Rod Nut: 1/8" American Series
Headstock: Artist Signature on Headstock

 

Electronics

Bridge Pickup: Dual-Coil Ceramic Noiseless™
Middle Pickup: Dual-Coil Ceramic Noiseless™
Neck Pickup: Dual-Coil Ceramic Noiseless™
Controls: Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge/Middle Pickup)
Pickup Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Pickup Configuration: SSS

 

Hardware

Bridge: 2-Point American Series Synchronized Tremolo with Stainless Steel Saddles
Hardware Finish: Chrome
Tremolo Arm Handle: Standard Tremolo Arm
Tuning Machines: Deluxe Staggered Cast/Sealed Locking
Pickguard: 3-Ply Mint Green
Control Knobs: Aged White Plastic
Switch Tips: Aged White

 

Miscellaneous

Strings: Fender® USA 250L, NPS (.009-.042 Gauges)
Unique Features: Thinner "C" Shape Maple Neck, Contoured Heel for Easier Access to Upper Frets, LSR Roller Nut, Aged Knobs and Pickup Covers
Included Accessories: Vintage Tweed Case, Strap, Cable

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download