GearTunes    > Effects    > Visual Sound    >

V3 H20 — List: $265.19 Street: $179.00

Visual Sound V3 H20 Chorus Echo Signal Chain

  • PRS NF3
  • Fishman Asterope Pro Studio AST-P15-SSG
  • Visual Sound Route 66
  • Visual Sound V3 H20
  • Roland JC-120
  • Shure SM57
  • Avid Digi 003
  • Universal Audio UAD-2 Satellite Quad Core

Guitars & Gear Live: GearTunes' Doug Doppler demos the Visual Sound V3 H20 Chorus & Echo

  • Fender Eric Johnson Stratocaster
  • PRS NF3
  • Visual Sound V3 H20
  • Roland JC-120
  • Shure SM57
  • Millennia Music & Media Systems HV-37
  • Avid Digi 003

VISUAL SOUND's V3 Series H20

The V3 H2O is more than a mere re-boot of one of the finest dual pedals of all time; it is a carefully thought out complete redesign. It has all the classic tones from its storied past, yet the capability to give the user the otherworldly tones of what is yet to come. To make the V3 H2O more pedal board friendly and rugged, the housing and footswitches have been updated. To give the chorus circuit more versatility, knobs for chorus/vibrato, and tone, along with switches for detune have been added. The Echo keeps its stellar warmth, yet now has the trance inducing ability to go into controlled oscillation. The V3 H2O is truly the finest echo and analog modulation pedal available.

 

- Analog tone, hybrid Echo channel

- Extremely versatile fully analog Stereo Chorus capable of true pitch vibrato

- Light, lush, Leslie, or pulsating out-of-this-world effects

- Pure Tone buffer on/off and separate Input and Output for each channel

- Change order of effects, patch in a loop, or use a switching system

- Reliable and silent True Bypass switching with the custom designed Forever Footswitch™ rated for 10 million hits.

Size: 5.11” x 4.45” x 2.05” (130 x 113 x 52mm) including jacks in front and knobs on top.

Weight: 1.46 lbs. (658 grams)

Current Draw: 56mA max.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download