GearTunes    > Effects    > Fargen Amps    >

Pete Anderson Tumbleweed — Street: $299

Signal Chain

  • Reverend Guitars Pete Anderson Eastsider T
  • Fishman Asterope Pro Studio AST-P15-SSG
  • Dean Markley Helix, 10-46
  • Millennia Music & Media Systems HV-37
  • Radial JCR Reamp
  • Fargen Amps Pete Anderson Tumbleweed
  • EarthQuaker Devices Disaster Transport SR
  • Dean Markley CD30
  • Shure SM57
  • Triad-Orbit ORBIT 2
  • Triad-Orbit TRIAD 1
  • Avid Digi 003
  • Universal Audio UAD-2 Satellite Quad Core

Signal Chain

  • Ibanez 698MS
  • Dean Markley Helix Acoustic Phos 13-56
  • Reverend Guitars Pete Anderson Eastsider T
  • Dean Markley Helix, 10-46
  • Dean Markley Refill Bag of 72 1.0mm Delrin Blue Picks
  • Fishman Asterope Pro Studio AST-P15-SSG
  • Radial JCR Reamp
  • Fargen Amps Pete Anderson Tumbleweed
  • EarthQuaker Devices Disaster Transport SR
  • Dean Markley CD30
  • Shure SM57
  • Triad-Orbit ORBIT 2
  • Triad-Orbit TRIAD 1
  • Ibanez 2369B
  • Dean Markley Blue Steel Bass, 45-105
  • Millennia Music & Media Systems HV-37
  • Avid Digi 003
  • Toontrack EZ Drummer
  • Universal Audio UAD-2 Satellite Quad Core

Tumbleweed is an innovative country pedal – a two-fold compressor and clean boost in one pedal. The comp side has level and sensitivity controls, while the clean boost supports a level-control and three-way toggle switch with Brit, Cali, and Jazz voicing. Separate bypass switches allow the comp and boost to be used together, or separate as two individual units. Tumbleweed is two pedals in one… a combination compressor and gain. Made in the U.S.A.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download