GearTunes    > Effects    > Boss    >

FDR-1 Fender ‘65 Deluxe Reverb Amp — List: $205.50 Street: $129.00

The second in the new Legend Series is the FDR-1, based on the Fender 1965-era Deluxe Reverb — a coveted tube amp known for its natural touch-responsive and distinctive snappy overdriven sound. In conjunction with Fender, BOSS designed this stompbox to recreate the legendary tone of the 1965 Fender Deluxe Reverb amp. Features include the same controls on the original Deluxe Reverb: Level, Gain, Treble, Bass, Vibrato and Reverb. The FDR-1 also functions perfectly as a “pre-gain pedal” placed before an already overdriven amp to add the tone character of the Deluxe Reverb.

- Recreates the legendary tone of the 1965 Fender Deluxe Reverb guitar amp
- Level, Gain, Treble, Bass, Vibrato and Reverb controls
- Road-tough BOSS metal construction
- Perfect pre-gain pedal for adding or retaining Fender tone color

Nominal Input Level: -20 dBu

Input Impedance: 1 M ohm

Nominal Output Level: -20 dBu

Output Impedance: 2.2 k ohms

Recommended Load Impedance: 10 k ohms or greater

Controls: Pedal switch, GAIN knob, LEVEL knob, TREBLE knob, BASS knob, VIBRATO knob, REVERB knob

Indicator: CHECK indicator (Serves also as battery check indicator)

Connectors: INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V)

Power Supply: DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)

Current Draw: 40 mA (DC 9 V)

Expected battery life under continuous use: Carbon: 2.7 hours, Alkaline: 9 hours * These figures will vary depending on the actual conditions of use.

Accessories: Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), Dry Battery 006P/9V (6LR61)

Options: AC Adaptor (PSA series)

Size and Weight
Width: 73 mm; 2-7/8 inches

Depth: 129 mm; 5-1/8 inches

Height: 59 mm; 2-3/8 inches

Weight: 0.4 kg; 1 lbs.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download