The Turbo RAT is the most intense pedal in the RAT family. For those brave enough to harness its power, it provides a palette of distortion unequaled by any other pedal. This is why it has been a main ingredient in the post punk/indie rock movement of the past twenty years.
Boasting more than twice the maximum output of the original RAT, the Turbo RAT is hard-clipping while the mid-range frequencies are slightly scooped. With a less compressed signal, it also has a brighter tone, so you'll have no trouble being heard through the mix. Since this pedal was designed around the musical distortion that made the RAT famous, it retains these qualities without sounding harsh.
The Turbo RAT features the legendary RAT Filter control. Turn it to the right to roll off brittle high-end frequencies. Having trouble cutting through the mix? Turn the Filter down and allow the natural brightness of your instrument to shine through. The Distortion and Volume controls dial in the perfect amount of gain while keeping the level consistent with your clean tone. While there's no mistaking the legendary RAT tone when the pedal is on, true-bypass switching ensures that when the pedal is off, there is no coloration of your sound.
Pro Co Sound also makes several other highly regarded effects including the popular RAT2, You Dirty RAT, Deucetone RAT, and SOLO. Each effect has its own unique tone structure.
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|