VERY dynamic, touch-sensitive Plexi tones in a box!

As you advance the DRIVE control this unit will morph into different Plexi era characteristics.. At the bottom of the sweep a nice JTM45 ish tone is present, roll back your volume knob on the guitar and the clipping goes away, just like the real thing!  Advance the TONE control while turning up the DRIVE and all of a sudden you are in 68 PLEXI 100 land.. FULL ON JCM 800 ROAR when dimed!

And it still cleans up via pick attack and volume control at the guitar with humbuckers or single coils!!!!

This is one wicked pedal and has a uniquely modified mid range bark to it..
I highly recommend this unit to anyone looking for that HUGE, high gain, rippin, PLEXI tone that actually cleans up like the real deal..
Check out Lance Keltner’s video at the VIDEO tab above..

 

FEATURES

- Balanced, medium gain overdrive to full on ROAR of a JCM 800

- Great dynamic low end response and open mid-range BARK

- Connectors: Input, Output, DC adapter

- Power Supply: 9V battery operation or 9VDC adapter – NEGATIVE CENTER – 10mA draw

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download