TUX is a “ruthless animal” bearing the Taurus name. This effect controls dynamics of your instrument. Imagine that its effectiveness is as powerful as the animal itself. TUX allows for modification of dynamic by two main features: limiter or compressor.
Taurus has built them based on transparent and passive for the quality of sound optical components. That means there are no side effects to your sound. No hum noise nor any distortion whatsoever.
LIMITER-COMPRESSOR - mode switch
COMPRESS – compression level (ratio) knob
LEVEL – volume level knob
RANGE – range level (band-threshold) knob
PUNCH – punch level (attack) knob
Power supply: external power supply 12V/100mA + internal voltage converter from 12V of external power supply to 24V for higher sound dynamic range of our effect.
Dimensions: (H x W x D) 65 x 122 x 144mm
Net weight: 0,65kg
Gross weight (Effect + power supply): 1,1kg
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|