Overdrive & Compression
In 1999, Visual Sound made the statement “Our Route 66 is sure to become as legendary as its namesake.” Since then, the Route 66 pedal has become a must-have for artists like Jonny Lang and Kings of Leon.
With broad flavors of Compression and Overdrive, Route 66 sounds amazing with both guitar and bass. Many players leave the compressor on all the time because it just makes your instrument sound better. The overdrive is smooth and crisp, covering everything from mild boost to cranked amp sounds.
The V2 Series Route 66 gives the same great tone guitarists have come to love over the years, plus an added noise reduction system that gives you that quiet ride you’ve always wanted. Classic compression combined with Classic Overdrive - these two effects sound great on their own, but combine them together and get the ultimate compliment to one another in one pedal. New housing, new stomp switches designed by Bob Weil himself -- and an all-new, noise-free experience -- this version of the Route 66 has raised the bar for years to come.
You always want to sound your best. With Route 66, you will.
Type: Compressor, Overdrive, Multi-Effects
Battery/AC: Both, 9VDC
Input: Mono Output: Mono
Compressor Controls: Comp, Tone, Gain, Tone Control On/OFF Switch
Overdrive Controls: Drive, Tone, Volume, Bass Boost On/Off Switch
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|