GearTunes    > Compression and Sustain    > Keeley    >

4 Knob Compressor — List/Market Price: $329.00 / $259.00

Signal Chain

Signal Chain

Signal Chain

Signal Chain

The Keeley Compressor effect has nothing but tone tested components and true bypass switching and the effect switching incorporates a triple pole-double throw switch! The user will marvel at the clean unaffected sound when in the bypass mode and the compressor has an LED for effect indication.

Metal film resistors and capacitors ensure the cleanest compressor on the market. Hand matched transistors to less than 1% tolerance and ensures the musician receives a perfectly compressed signal with no chance for unwanted distortions.

The sound quality of the Keeley comp is unheard of in the stomp-box arena and is only seen in the high-end, very expensive rack-mount or tube equipment.

After tweaking the compressor design, the Keeley Compressors now have an input sensitivity control which allows the user to run keyboards, drum machines, drum mics, master recordings and other line-level uses with the Keeley Compressor. You’ll raise your signal to a new level of Sonic-Awesomeness.

The Keeley Compressors now have an Internal Attack control, designed for bass players with high output active pick-ups or active pedal boards with buffers.

Standard 9V DC battery and AC adapter connection. Low Current Draw - 5mA.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download