GearTunes    > Combos    > Orange    >

Rockerverb 50 MKII 1x12 Combo — List/Market Price: $3,249.00 / $2,349.00

Signal Chain

  • Gibson Les Paul Junior Special
  • Dunlop Manufacturing Dunlop Nickel Plated Steel Guitar Strings
  • Dunlop Manufacturing Tortex .50mm Red
  • Orange Rockerverb 50 MKII 1x12 Combo
  • Celestion Vintage 30, 16 ohm
  • Miktek C7
  • Avid Digi 003
  • Universal Audio UAD-2 Satellite Quad Core

Signal Chain

  • Ibanez JEM7VWH
  • GHS Progressives, 9-42
  • Dunlop Manufacturing Tortex 1mm Blue
  • Orange Rockerverb 50 MKII 1x12 Combo
  • Celestion Vintage 30, 16 ohm
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

Signal Chain

  • Gibson Gary Moore BFG Les Paul
  • Orange Rockerverb 50 MKII 1x12 Combo
  • Celestion Vintage 30, 16 ohm
  • Miktek C7
  • AEA RPQ Ribbon Pre
  • Avid Digi 003
  • Universal Audio UAD-2 Satellite Quad Core

Signal Chain

  • WCR L-Model
  • Orange Rockerverb 50 MKII 1x12 Combo
  • Celestion Vintage 30, 16 ohm
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

You asked, Orange listened! The Rockerverb 50 MK II and Rockerverb 100 MK II amps have everything you expect from the Orange Rockerverb but with improved functionality.


Improvements include:

    - Mid EQ control on clean channel

    - More transparent FX loop

    - Larger, more usable reverb with additional ECC83 preamp valve to power it

    - 50 watt models now come stock with EL34 output valves

 

All Valve, channel-switching amplifier with ultra-transparent effects loop and valve-driven reverb. This amplifier utilises a two stage clean channel with a four stage dirty channel.

The Clean Channel delivers a super rich clean tone with beautiful harmonic overtones. It is a non-master channel, much like vintage Orange amps, and when cranked the power section breaks up faster, delivering the most classic British crunch imaginable.

The Dirty Channel has four stages of unadulterated filth, but it is NOT a one-trick pony. Move the Gain knob from 0 to 10, and as you do you’ll find a variety of Orange tones, from metal to fusion, rock to blues…there’s even some country in there.

All Rockerverb 50 MK II amps offer switchable output valve’s. This means you can swap the factory fitted EL34 output valves to 6L6′s, KT88′s, or 6550′s. Just make sure you take your amp to a tech for rebiasing!

Features
All valve
Two foot switchable channels
Foot switchable valve reverb
Valve FX loop

Controls
Reverb
Dirty Channel: volume, treble, middle bass, gain
Clean Channel: treble, middle, bass, volume

Output Power
100 Watts

Valves
Power amp: 4 x EL34
Preamp: 4 x Ecc83/12ax7
Reverb: 2 x Ecc81/12at7
FX loop: 1 x Ecc81/12at7

Speaker Output Options
1 x 16 Ohm cabinet connected to the 16 Ohm output
1 x 8 Ohm cabinet connected to one of the 8 Ohm outputs
2 x 16 Ohm cabinets each connected to one of the 8 Ohm outputs

Unboxed Dimensions
Height: 27cm, 10.63in
Width: 55cm, 21.65in
Depth: 28cm, 11.02in

Unboxed Weight
24.35kg, 53.62lb

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download