From the 60’s came an effect that had a serious impact on the way guitarist expressed themselves. It was an effect that when used right had that “wow” factor, and it was a tool that helped make the “Star Spangled” banner relative to a new generation in the hands of a man named Jimi. Some of the most influential guitarist ever have consistently found a way to express their voice with this circuit, and we feel you will too.
With a large speed control that is easily controlled with your foot, changes to the speed of the effect are easy during live settings. The Speed LED blinks in time with the speed even when the unit is off so you always know what is going on inside. Controls for Depth (intensity of the effect), Volume Cut and vibrato/chorus toggle (gives you the classic chorus or vibrato settings with the flick of a switch). The Warble-Tron runs on standard 9v power and is internally turning your standard 9v into 15v, so there is no need to have a funky adapter or wall-wart power supply.
This pedal requires standard 9V DC Negative power and measures 4.7"x3.7"x2"
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|