GearTunes    > Chorus    > Vertex    >

Landau Stereo Chorus — $259.00

The Landau Stereo Chorus is the result of modifications developed with guitarist Michael Landau to re-engineer the unique sound and specifications of his revered Arion SCH-1 Chorus, while adding several new features. To re-create this pedal, Vertex takes a stock Arion SCH-Z Chorus and matches it to Landau's coveted Arion Chorus (a factory defect), which has a much thicker mid-range and low-end body compared to a stock unit. They then add a second Chorus voicing for a richer vibrato, and more Hi-Fi Chorusing (tweaked to Landau's taste), reminiscent of his studio tones on countless recordings in 80's and 90's.

The features include:

- True stereo bypass
- Mono and stereo operation
- Volume trim pot for matching output levels (ranging from off to +2dB over unity gain)
- Identical to the defective Arion Chorus that Michael Landau has popularized
- Two distinct Chorus voicings
- Refined aesthetics
- Modified and handcrafted in California

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download