This is a Digital Loadbox
That is, a combination of an analog REACTIVE 100W RMS loadbox and a powerful 32-bit DSP. The Torpedo Live was directly inspired by the critically acclaimed Torpedo VB-101, the first-ever digital loadbox to have hit the market.
Your onboard cab collection
Carry up to 32 Two Notes cabs to choose from our ever growing cab collection (currently more than 45 cabs are available) in a single rack space unit.
8 carefully selected microphones ready to capture your best guitar riffs. Whether you need a classic dynamic, a sweet ribbon or a high fidelity condenser mic, you have them all inside the box!
Mike like a Pro
Want more focus? Get closer to the cone. Two Notes’ exclusive proprietary cabinet and microphone measurement technology accurately emulates the sound and process of miking a guitar or bass cabinet in a professional recording studio.
Onboard Power Amp Simulation
For those playing with guitar preamps, we included all the fantastic sounding tube power amp emulations originally developed for the Torpedo VM-202. Keep your setup simple and light! And more versatile thanks to MIDI control.
Want more? Use your own IR’s!
Load up to 512 IR’s inside the unit (3rd party or your own files). The «Quick Preview» feature of the Torpedo Remote software (Mac/PC) allows you to browse your library on your computer while playing with the Torpedo LIVE.
Input impedance : 8 ohms fixed
Max input power : 100W RMS
Controlled ventilation and thermal security : amp and musician are perfectly safe
Unbalanced line input
Balanced line output
Front panel stereo headphone output
S/PDIF output (48/96 kHz)
24 bits / 96 kHz AD/DA convertors
S/N ratio : 100dB
32 bits float internal processing
Latency = 3 ms
Many parameters influence the sound of your guitar or bass rig when it comes to recording. Taking good care of the cabinet selection and miking will dramatically improve the sound of your takes. The Torpedo simulation reproduces the tiniest variations of a cabinet behavior such as frequency response and distortion (*). Move the microphone in the virtual studio room thanks to the Torpedo IR synthesis, control the phase with the Variphi (*): all the settings you need to achieve great recordings are here.
(*) VB-101, VM-202 and PI-101 only
High-quality electronic design
The best simulation is nothing without a perfectly designed analog and digital circuit. Two Notes focus on the whole signal chain, from your amp or preamp output to the PA, monitor, headphones or recorder to ensure the best performance. Guitar and bass players deserve studio quality gear !
Power amp emulation
Connect your preamp or stompbox to your Torpedo Live, C.A.B. or PI-101. They embed our component-based tube power amp simulation. Simply choose the amp design, characteristics, and select the tube type.
Width x depth x height : 19 x 7.5 x 1.7 (in.) / 483 x 189 x 44 (mm)
4.4 lb (2 kg)
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|