The new OR100H from Orange Amplification can simply be summed up in one word ‘Stunning’! This top of the range guitar amp is the first OR model to feature two channels and delivers up to 100 watts of incredible Orange tone making it the crown jewel of the OR series.
Drawing on the heritage of the original and iconic ‘Pics Only’ launched in 1972, the new OR100H has taken the best of the original features in terms of tone, construction and design and uses today’s expertise to create a guitar amp of epic proportions. Better still, the new amp utilises the very best valve technology to create a tone that is so very special!
The OR100H incorporates for the first time on an ‘OR’ series amp; twin channels, as well as a valve driven FX loop, foot-switchable boosts and independent EQ. The output power can be scaled between 100,70,50 and 30 watts, plus there is a choice of clean and dirty channels.
As well as being one of the most versatile and dynamic amps Orange has ever made, the OR100H delivers a classic tone that is unique to Orange; a sound that so many famous artists describe as ‘the holy grail’ of tones!
Type: Tube Head
Power Tubes: 4x EL34
Channels: 2 with independent controls
Effects Loop: Yes
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|