The award-winning H9 delivers Eventide's acclaimed sound and can run all of Eventide's stompbox effects.
The H9 features a simple, one-knob user interface which allows easy Effect Editing and Preset Selection. Two onboard Footswitches let you change Presets, Tap Tempo, and Bypass with your feet during live performance.
While the H9 is fully controllable via its front panel, a free editor/librarian, H9 Control, can be downloaded to your Mac, PC, or iOS device. Use the H9 Control app for live editing, creating and managing presets, and changing system settings.
H9 even connects via Bluetooth to iPods, iPhones and iPads for wireless live control.
The H9 features stereo audio I/O, MIDI I/O, Expression Pedal, and Auxiliary Switch inputs.
Input impedance: 600K ohms (mono or stereo)
Output Impedance: 470 ohms
Recommended Load Impedance: 10K ohms or greater
Input 1 (mono): ¼ inch mono phone jack
Input 2: ¼ inch mono phone jack
Output 1 (mono): ¼ inch mono phone jack
Output 2: ¼ inch mono phone jack
Expression Pedal: ¼ inch stereo phone jack
Mini USB: Use 2.0 cables only
MIDI In: Five pin DIN (Female)
MIDI Out/Thru: Five pin DIN (Female)
AC Adapter Jack: Power Supply included
Power: 9 VDC, 500 mA, center pin (+)
Dimensions English: 5.25" (H) x 4.65" (W) x 1.96" (D)
Metric: 133 (H) x 118 (W) x 50 (D) mm
Weight: 1.53 lbs, 0.7kG
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|