Select images for product info and authorized dealers for gear shown in this video.

  • JHS Prestige

Select images for product info and authorized dealers for gear shown in this video.

  • JHS Prestige

Select images for product info and authorized dealers for gear shown in this video.

  • JHS Mini Bomb Boost
  • JHS Prestige

Select images for product info and authorized dealers for gear shown in this video.

  • JHS Prestige

Select images for product info and authorized dealers for gear shown in this video.

  • JHS Prestige

In the footsteps of our long-ago discontinued Mr Magic pedal, we bring you the "final act" in boost magic...The Prestige!  From buffer, to boost, to tone enhancer, the Prestige will prove to be a vital and necessary piece of gear for anyone's rig. With the boost knob set to zero, you have in your hands an amazing buffer/enhancer for long cable runs as well as a tool that will simply add some life back into your rig. When the Boost knob is in the first 25% you will get different flavors of the buffer/enhancer as well as slight volume increases.  When the Boost knob is set between 25% and 50% you have a powerful, dynamic solo boost that adds definition, clarity and a little magic to your solos and lead passages. When set at 50% or more, the Prestige gives you the ability to break up your tube amp in a smooth and natural way resulting in real tube overdrive from the preamp section of your tube amp. The last 25% of the volume range can completely destroy your amp in the best way possible, resulting in rich soaring sustain, breakup, and on some amps even a smooth warm fuzzy growl.

This super small 1.5"x3.6" booster can do what needs to be done no matter what the task. If you need a little magic in your life, look no further!

This pedal requires standard 9V DC Negative power and measures 3.6"x1.5"x1"

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download