GearTunes    > Boost and Buffer    > Majik Box    >

Doug Aldrich Rocket Fuel — List/Market Price: $399.99 / $289.99

Signal Chain

Signal Chain

Signal Chain

Signal Chain

Signal Chain

Signal Chain

It was a tall order. Make a box that could replace a vintage boost / eq unit that had been in Doug’s rack for most of his career. The idea was to have a carefully tuned overdrive that would produce the harmonic richness, and midrange punch and carefully tailored low end that Doug sought, coupled with a very special boost section. The two sections were designed to be used both separately and in series (the way Doug normally uses the pedal). After nearly two years of R&D, (Doug used early versions on some parts of Whitesnake’s Good to Be Bad CD) Majik Box has delivered a box that meets all of Doug’s exacting specifications. Hear the Rocket Fuel yourself on tour with Doug and Whitesnake when they come to your town.

 

Features Include:

    - Specially tuned overdrive and boost in one box - Individual on / off footswitches

    - 3 way bass shift switch to dial in the right amount of bass for your rig

    - True Bypass

- Ultra bright white and yellow LEDs

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download