Select images for product info and authorized dealers for gear shown in this video.

  • Vertex Boost

Select images for product info and authorized dealers for gear shown in this video.

  • Vertex Boost

Select images for product info and authorized dealers for gear shown in this video.

  • Vertex Boost

Select images for product info and authorized dealers for gear shown in this video.

  • Vertex Boost

The Vertex Boost is expertly crafted to be a clean boost, buffer and volume pedal in one. The Boost is designed to leave your tone unchanged, while boosting the level of your signal. The Boost also features an ultra-linear buffer to condition your line with ZERO tonal coloration, even with dozens of pedals in your chain. Additionally, you have total volume control by connecting the Boost with any EXP pedal and adjusting your volume as you would with a volume pedal. When the Boost is OFF, the EXP will function as a typical volume pedal (sweeping from silent to unity gain). When the Boost is ON, the EXP will control the boosted volume (sweeping from silent to wherever the level knob is set). Since your guitar signal is completely isolated from the EXP pedal, your tone remains open and full-range, and most importantly, it feels like you're plugged straight into your amp.

The features include:

Buffered Bypass
100% Analog Circuitry
Total Control of Output Level via EXP
Up to +16dB of Available Clean Boost
Handcrafted in California

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download