The Roger Waters Precision Bass® is named for the world-famous bassist/singer/songwriter whose elegant grooves and infectious riffs are hallmarks of the legendary Pink Floyd sound and an acclaimed solo career that continues stronger than ever today.
The instrument is as tastefully tailored as Waters' own simple-yet-sophisticated bass work, with distinctive features including black-on-black color scheme (black body and single-ply pickguard), Seymour Duncan® Basslines SPB-3 Quarter-Pound split-coil Precision Bass pickup, knurled black control knobs (master volume, master tone), brass nut, black bridge and strap buttons, vintage '70s-style "Fender"-stamped open-gear chrome tuners and gasketed "F"-stamped neck plate. Other features are a maple neck with vintage-style truss rod and slotted truss rod nut, 9.5"-radius maple fingerboard with 20 medium jumbo frets, gloss urethane finish (body and neck) and deluxe gig bag.
Model Name: Roger Waters Precision Bass®, Maple Fingerboard, Black
Model Number: 0147000306
Advertised Price: $879.99
Body Material: Alder
Body Finish: Gloss Urethane
Body Shape: Precision Bass®
Neck Material: Maple
Neck Finish: Gloss Urethane
Neck Shape: Thick "C"
Scale Length: 34" (864 mm)
Fingerboard Radius: 9.5" (241 mm)
Number of Frets: 20
Fret Size: Medium Jumbo
String Nut: Machined Brass
Nut Width: 1.75" (44.45 mm)
Position Inlays: Black Dot
Truss Rod Nut: Vintage-Style Slotted
Neck Plate: 4-Bolt Stamped "F" with Rubber Spacer
Middle Pickup: Seymour Duncan® Basslines SPB-3 Quarter Pound Split Single-Coil Precision Bass®
Controls: Master Volume, Master Tone
Pickup Configuration: Split Single-Coil
Bridge: 4-Saddle Standard Vintage-Style with Single Groove Saddles
Hardware Finish: Chrome/Black
Tuning Machines: Fender '70s Vintage-Style Stamped Open-Gear
Pickguard: 1-Ply Black
Control Knobs: Knurled Flat-Top
Strings: Fender® USA Bass 7250M, NPS (.045-.105 Gauges)
Unique Features: Thick C-Shape Neck, Brass Nut, Seymour Duncan® Basslines SPB-3 Quarter Pound Pickup, Black Hardware, "F" Stamped Neck Plate with Rubber spacer, '50s Spaghetti Logo Decal
Included Accessories: Saddle height Adjustment Wrench
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|