GearTunes    > Bass    > Fender    >

Reggie Hamilton Standard Jazz Bass — List: $1,199.99 Street: $899.99

The Reggie Hamilton Standard Jazz Bass® guitar is designed to the virtuoso R&B bassist's exacting specs, with gorgeous tone, great looks and unbelievable feel. Features include an American Series Precision Bass® pickup, custom Noiseless™ Jazz Bass bridge pickup, active/passive switch, 20-fret maple neck with a rosewood fingerboard, '70s stamped open-gear tuners and Hipshot® Bass Xtender drop-D tuner on the E string.

General

Model Name: Reggie Hamilton Standard Jazz Bass®, Rosewood Fingerboard, 3-Color Sunburst, 4-Ply Tortoise Shell Pickguard
Model Number: 0138700300
Series: Artist
Advertised Price: $899.99


Body

Body Material: Alder
Body Finish: Polyester
Body Shape: Jazz Bass®


Neck

Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: "C" Shape
Scale Length: 34" (864 mm)
Fingerboard: Rosewood
Fingerboard Radius: 9.5" (241 mm)
Number of Frets: 20
Fret Size: Vintage-Style
String Nut: Synthetic Bone
Nut Width: 1.5" (38.1 mm)
Position Inlays: White Dot
Headstock: Artist Signature on Headstock
Neck Plate: 4-Bolt Vintage-Style


Electronics

Bridge Pickup: Custom Noiseless™ Single-Coil Jazz Bass
Middle Pickup: American Standard Alnico V Split Single-Coil Precision Bass
Controls: Master Volume, Pan Control, Three-Band Active EQ with Treble Boost/Cut, Bass Boost/Cut and Mid Boost/Cut
Pickup Switching: Pan Pot
Pickup Configuration: SS
Special Electronics: Active/Passive Mini-Toggle Switch


Hardware

Bridge: 4-Saddle American Vintage Bass
Hardware Finish: Chrome
Tuning Machines: Fender '70s Vintage-Style Stamped Open-Gear with Hipshot® Bass Xtender™ "Drop D" on the E String
Pickguard: 4-Ply Tortoiseshell
Control Knobs: Black Plastic


Miscellaneous

Strings: Fender® USA Bass 7250ML, NPS, (.045-.100 Gauges)
Unique Features: White Dot Position Inlays, Black Plastic Knobs and Pickup Covers, 4-Bolt Neck Plate Reggie Signature on Back of Headstock, Hipshot® Bass Xtender™ Drop D Tuning Key on the E String, P/J Pickup Configuration, Active/Passive Switch, Side Mounted Output Jack.
Included Accessories: Deluxe Gig Bag

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download