GearTunes    > Bass    > Fender    >

Aerodyne Jazz Bass — List: $1,149.99 Street: $799.99

Cutting-edge bassists looking for a lightweight high-performance bass with a striking appearance will love the Aerodyne™ Jazz Bass® guitar. This special-edition Jazz Bass features a bound basswood body with a cream-bound carved top and no pickguard. The maple neck has a rosewood fingerboard, matching painted headstock and dot position inlays on the side only. Other features include a split single-coil Precision Bass® middle pickup, single-coil Jazz Bass bridge pickup, top-mounted black Stratocaster® output jack, smoked chrome bridge and tuners, smoked chrome skirted control knobs and a silver Fender® headstock logo.

General

Model Name: Aerodyne™ Jazz Bass®, Rosweood Stained Fingerboard, Black, No Pickguard
Model Number: 0254505506
Series: Deluxe
Advertised Price: $799.99
Color: Black

 

Body

Body Material: Basswood
Body Finish: Urethane
Body Shape: Jazz Bass®
Body Binding: Cream

 

Neck

Neck Material: Maple
Neck Finish: Satin Urethane
Neck Shape: "C" Shape
Scale Length: 34" (864 mm)
Fingerboard: Stained Rosewood
Fingerboard Radius: 7.25" (184.1 mm)
Number of Frets: 20
Fret Size: Medium Jumbo
String Nut: Synthetic Bone
Nut Width: 1.5" (38.1 mm)
Position Inlays: Side Dot
Headstock: Matching Painted Headcap
Neck Plate: 4-Bolt Standard

 

Electronics

Bridge Pickup: Standard Single-Coil Jazz Bass
Middle Pickup: Standard Split Single-Coil Precision Bass
Controls: Volume 1. (Middle Pickup), Volume 2. (Bridge Pickup), Master Tone
Pickup Configuration: SS

 

Hardware

Bridge: 4-Saddle Standard
Hardware Finish: Smoked Chrome
Tuning Machines: Standard Open-Gear
Pickguard: None
Control Knobs: Knurled Dome

 

Miscellaneous

Strings: Fender® USA Bass 7250ML, NPS, (.045-.100 Gauges)
Unique Features: Unique Radius/Carved Top, Cream Binding on Top of Body, Smoked Chrome Bridge and Tuning Machines, Black Top Mounted Stratocaster® Output Jack, Smoked Chrome Skirted Control Knobs, Rear Mounted Controls, Side Dot Position Inlays Only, Matching Painted Headstock, Silver Applique Logo, No Pickguard
Included Accessories: None

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download