GearTunes    > Bass Fuzz    > JHS    >

Pandamonium — $ = Market Value

Select images for product info and authorized dealers for gear shown in this video.

  • JHS Pandamonium

Select images for product info and authorized dealers for gear shown in this video.

  • JHS Pandamonium

Select images for product info and authorized dealers for gear shown in this video.

  • JHS Pandamonium

One pedal that you can use in every gig for the rest of your life... Seriously. We ran this pedal through the mill with touring bands all over the country in every genre and venue possible and it came out a winner.

The right side is our “4 Wheeler Fuzz” that can dish out almost any fuzz tone your bass desires. The left side is a special preamp/overdrive that is based on the famous SVT tone that has held its ground on millions of stages and albums for decades. With Volume, Drive, Bass and Treble, you can set this side for an always-on preamp/enhancement all the way to a tube flavored distortion with all the ranges in-between. A lot of players have found this pre-amp side as an answer to their dull or lifeless rig while others can’t believe how it awakened new tones and sensitivity from what they thought couldn’t get any better. With these two totally independent channels that can be used alone or stacked on top of each other, this is like a bass swiss army knife that will never leave you lacking the tone you need.

On V3 we have added our order toggle switch so you can choose what circuit comes first in the chain when they are run together as well as shrinking the pedal down to our standard Double Barrel / Sweet Tea size 2 in 1 casing!

This pedal requires standard 9V DC Negative power and measures 4.7"x3.7"x1.2"

VERSION HISTORY
V1 = larger enclosure. brown transparent color.
V2 = color changed to the current color. drive section of Panda Pre adjusted for more clean headroom
V3 = current production model. smaller enclosure. order toggle added. 4 wheeler side has the hi/low switch.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download